Certificate III in Electrotechnology Electrician BRISBANE

UEE30811 - certificate III In Electrotechnology Electrician BRISBANE


Certificate III in Electrotechnology Electrician in Brisbane- Persons gaining this certificate will be able to select, install, set up, test, fault find, repair and maintain electrical systems and equipment in buildings and premises. The qualification includes ERAC – Electrical Regulatory Authorities Council requirements for an `Electrician's Licence'.

There is no funding currently available for this course.

4 Years


Face to face delivery, combining theory and practical training and assessments. Mixed delivery mode may be available with some units and need to be negotiated with the Trainer. A simulated practical workshop will be conducted with specific units.

Please follow the below steps :

  • Get your employer to sign you up as an apprentice
  • Contact us to enrol with us and pay the fee
  • Start your course with a 5-week boot camp to be job-ready!
  • Enjoy full-time work and flexible study for 4 years

Students will need to demonstrate an appropriate level of language, literacy and numeracy skills and knowledge to undertake a course at this level. To gain entry into Certificate III in Electrotechnology electrician in Brisbane UEE30811 candidates are required to be apprentices who have entered into a Training Contract with Australian Apprenticeships. 
Must be 18 years of age or over. Education – Successful completion of Year 12 or its equivalent. Candidates must be reasonably fit as practical work involves considerable amount of physical activity.  A wheelchair user or someone with significant physical disabilities simply may not be able to fulfill the requirement of the course.
Students must attach Unrestricted Electrical Licence during enrolment so the admin staff can verify before admission to the course.

To achieve a Certificate III In Electrotechnology Electrician- UEE30811 a total of 23 units of competency must be completed comprising 20 core and approximately three (3) elective units, depending on the units’ individual points, as detailed in the packaging rules and listed below.

The requirements for granting this qualification will be met when competency is demonstrated and achieved for:

All the Core competency standard units, defined in the Core Competency Standard Units table and a combination of Elective competency standard units to achieve a minimum required weighting points in accordance with the Elective Competency Standard Units table.

You may withdraw from this qualification and receive, where relevant, a Statement of Attainment for all units of competency you have successfully completed.

Students will receive a Nationally recognised certificate for Certificate III in electrotechnology Electrician.

CodeUnit of Competency/Unit NamePoints (Hours)
Core Units
UEENEEC020BParticipate in electrical work and competency development activities60
UEENEEE101AApply Occupational Health and Safety regulations, codes and practices in the workplace20
UEENEEK142AApply environmental and sustainable procedures in the energy sector20
UEENEEE102AFabricate, assemble and dismantle utilities industry components40
UEENEEE104ASolve problems in d.c. circuits80
UEENEEE105AFix and secure electrotechnology equipment20
UEENEEE107AUse drawings, diagrams, schedules, standards, codes and specifications40
UEENEEE137ADocument and apply measures to control OHS risks associated with electrotechnology work20
UEENEEG102ASolve problems in low voltage a.c. circuits80
UEENEEG101ASolve problems in electromagnetic devices and related circuits60
UEENEEG006ASolve problems in single and three phase low voltage machines80
UEENEEG033ASolve problems in single and three phase low voltage electrical apparatus and circuits60
UEENEEG103AInstall low voltage wiring and accessories20
UEENEEG104AInstall appliances, switchgear and associated accessories for low voltage electrical installations20
UEENEEG106ATerminate cables, cords and accessories for low voltage circuits40
UEENEEG063AArrange circuits, control and protection for general electrical installations40
UEENEEG107ASelect wiring systems and cables for low voltage general electrical installations60
UEENEEG109ADevelop and connect electrical control circuits80
UEENEEG108ATrouble-shoot and repair faults in low voltage electrical apparatus and circuits40
UEENEEG105AVerify compliance and functionality of low voltage general electrical installations40
Elective Units
UEENEEC001BMaintain documentation20
UEENEEC010BDeliver a service to customers20
UEENEED101AUse computer applications relevant to a workplace20
UEENEEI150ADevelop, enter and verify discrete control programs for programmable controllers60
UEENEED104AUse software for engineering applications40

Ausinet, as a Registered Training Organisation (RTO), recognises the Australian Qualifications Framework qualifications and Statements of Attainment issued by any other Australian RTO. You are encouraged to submit requests for credit from previous studies when enrolling to ensure that you are not enrolling in units you may not need to undertake. If you have completed units at other RTO and you think they may count towards the award requirements of the course you are enrolled in at Ausinet, submit an official copy of your results for the units you have undertaken. Credit transfer may fast-track your course.

Recognition of prior learning, also referred to as RPL, is the formal acknowledgement of a person's current skills and knowledge experience gained throughout life – regardless of how they have been acquired.
This is an important assessment pathway, particularly for people who are considering doing study.
The recognition gained may considerably reduce the study time needed to get a qualification.

The RPL assessment may include workplace observation, interviews and professional conversations, work samples and documented evidence.Please contact the office for an RPL kit.

Further training pathways from this qualification include but are not limited to Certificate IV and Diploma level qualifications. Possible job titles relevant to this qualification include:

  • A Grade Electrician • Electrician • Electrical Fitter Mechanic

  • Electrical Mechanic
  • Electrician
  • Electrical Fitter Mechanic
  • General Electrician

* Total nominal hours is 1080. Options available for flexible day and night classes depending on availability, course completion duration may vary depending on student self-paced completion of the units. Check our Calendar for dates. This is a competency based training not an attendance based training. Duration is subjective and varies with an individuals experience, intellect and tenacity.

Nationally recognized training logo
Call Now Button Scroll to Top