Certificate III in Electrotechnology Electrician DARWIN
UEE30811 - certificate III In Electrotechnology Electrician DARWIN
*Promotion only valid until December 2021
ABOUT THE COURSE
Persons gaining the Certificate III Electrotechnology Electrician qualification will be able to select, install, set up, test, fault find, repair and maintain electrical systems and equipment in buildings and premises. The qualification includes ERAC – Electrical Regulatory Authorities Council requirements for an `Electrician's Licence'.
This is a 4 year course. You will start with 5 weeks intensive boot camp at our facilities and we will make sure you are job-ready.
There is funding available for this course. The $1500 fee could be paid by your employer or yourself. We might also be able to offer payment plans. Please contact us for more details.
4 years apprenticehip
Face to face delivery, combining theory and practical training and assessments. Mixed delivery mode may be available with some units and need to be negotiated with the Trainer. A simulated practical workshop will be conducted with specific units.
Please follow the below steps :
- Get your employer to sign you up as an apprentice with GTNT by filling out the following form https://gtntgroup.wufoo.com/forms/sign-up-request-form
- Once GTNT receives the form, they will give the apprentice/trainee a call to conduct an Initial Assessment, after which a Field Solutions Officer will be allocated, and they will arrange a time to come out and complete the signup.
- Your employer will receive confirmation from GTNT
- Contact us to enrol with us and pay the fee
- Start your course with a 5-week boot camp to be job-ready!
- Enjoy full-time work and flexible study for 4 years
- If you are currently employed as a Trade assistant you can sign up as an Electrical Apprentice, if you are not employed you will need to find a job as an Electrical Apprentice.
- There are some requirements that employers must adhere to, to be eligible to take on an apprentice or trainee. The employer might also be eligible to receive incentives. Eligibility is assessed upon submission of the training contract, you can find more information on available incentives here.
- Students will need to demonstrate an appropriate level of language, literacy and numeracy skills and knowledge to undertake a course at this level.
- To gain entry into UEE30811 Certificate III in Electrotechnology – Electrician candidates are required to be apprentices who have entered into a Training Contract with Australian Apprenticeships NT.
- Must be 18 years of age or over.
- Education – Successful completion of Year 12 or its equivalent.
- Candidates must be reasonably fit as practical work involves considerable amount of physical activity. A wheelchair user or someone with significant physical disabilities simply may not be able to fulfill the requirement of the course
- You need to be a permanent resident or Australian citizen or have full study and working rights for at least 4 years
You will need to find an employer and get an apprenticeship contract before enroling.
To achieve a UEE30811 Certificate III in Electrotechnology Electrician a total of 23 units of competency must be completed comprising 20 core and approximately three (3) elective units, depending on the units’ individual points, as detailed in the packaging rules and listed below.
The requirements for granting this qualification will be met when competency is demonstrated and achieved for:
All the Core competency standard units, defined in the Core Competency Standard Units table and a combination of Elective competency standard units to achieve a minimum required weighting points in accordance with the Elective Competency Standard Units table.
You may withdraw from this qualification and receive, where relevant, a Statement of Attainment for all units of competency you have successfully completed.
Students will receive a Nationally recognised certificate for Certificate III in electrotechnology Electrician.
|Code||Unit of Competency/Unit Name||Points (Hours)|
|UEENEEC020B||Participate in electrical work and competency development activities||60|
|UEENEEE101A||Apply Occupational Health and Safety regulations, codes and practices in the workplace||20|
|UEENEEK142A||Apply environmental and sustainable procedures in the energy sector||20|
|UEENEEE102A||Fabricate, assemble and dismantle utilities industry components||40|
|UEENEEE104A||Solve problems in d.c. circuits||80|
|UEENEEE105A||Fix and secure electrotechnology equipment||20|
|UEENEEE107A||Use drawings, diagrams, schedules, standards, codes and specifications||40|
|UEENEEE137A||Document and apply measures to control OHS risks associated with electrotechnology work||20|
|UEENEEG102A||Solve problems in low voltage a.c. circuits||80|
|UEENEEG101A||Solve problems in electromagnetic devices and related circuits||60|
|UEENEEG006A||Solve problems in single and three phase low voltage machines||80|
|UEENEEG033A||Solve problems in single and three phase low voltage electrical apparatus and circuits||60|
|UEENEEG103A||Install low voltage wiring and accessories||20|
|UEENEEG104A||Install appliances, switchgear and associated accessories for low voltage electrical installations||20|
|UEENEEG106A||Terminate cables, cords and accessories for low voltage circuits||40|
|UEENEEG063A||Arrange circuits, control and protection for general electrical installations||40|
|UEENEEG107A||Select wiring systems and cables for low voltage general electrical installations||60|
|UEENEEG109A||Develop and connect electrical control circuits||80|
|UEENEEG108A||Trouble-shoot and repair faults in low voltage electrical apparatus and circuits||40|
|UEENEEG105A||Verify compliance and functionality of low voltage general electrical installations||40|
|UEENEEC010B||Deliver a service to customers||20|
|UEENEED101A||Use computer applications relevant to a workplace||20|
|UEENEEI150A||Develop, enter and verify discrete control programs for programmable controllers||60|
|UEENEED104A||Use software for engineering applications||40|
Ausinet, as a Registered Training Organisation (RTO), recognises the Australian Qualifications Framework qualifications and Statements of Attainment issued by any other Australian RTO. You are encouraged to submit requests for credit from previous studies when enrolling to ensure that you are not enrolling in units you may not need to undertake. If you have completed units at other RTO and you think they may count towards the award requirements of the course you are enrolled in at Ausinet, submit an official copy of your results for the units you have undertaken. Credit transfer may fast-track your course.
Recognition of prior learning, also referred to as RPL, is the formal acknowledgement of a person's current skills and knowledge experience gained throughout life – regardless of how they have been acquired.
This is an important assessment pathway, particularly for people who are considering doing study. The recognition gained may considerably reduce the study time needed to get a qualification.
The RPL assessment may include workplace observation, interviews and professional conversations, work samples and documented evidence. Please contact the office for an RPL kit.
Further training pathways from this qualification include but are not limited to Certificate IV and Diploma level qualifications. Possible job titles relevant to this qualification include:
- A Grade Electrician • Electrician • Electrical Fitter Mechanic
- Electrical Mechanic
- Electrical Fitter Mechanic
- General Electrician
Step by Step
* Total nominal hours is 1080. Options available for flexible day and night classes depending on availability, course completion duration may vary depending on student self-paced completion of the units. Check our Calendar for dates. This is a competency based training not an attendance based training. Duration is subjective and varies with an individuals experience, intellect and tenacity.