UEESS00098 - Electrical Test and tag Course -BRISBANE
ABOUT THE COURSE
Test and Tag is used to check the safety of electrical appliances. This is a safety requirement and testing and tagging equipment should be conducted on a regular basis.
This Test and Tag Training Course is the perfect short course that will give you the opportunity to work with the portable apparatus tester, utilising test results to establish the safety status, identifying safe and unsafe cords and apparatus, applying appropriate tagging, documenting testing activities and handling unplanned events.
This Test and Tag Training Course gives you real experience of testing & tagging. In this course you will get real experience in the workshop testing & tagging equipment which actually you are going to test more often.
The Test and Tag Training Course meets the requirements of both the Australian Standards and the WHS Regulations Code of Practice ‘Managing Electrical Risks in the Workplace’ which states inspection and testing of electrical equipment should only be carried out by a competent person who has the relevant knowledge, skills and test instruments to carry out the relevant inspection and testing. You will get a Nationally recognised Certificate on completion of your course.
Future pathways include the Test and Tag Three Phase course.
There are no entry requirements to our Test and Tag Training Course . It is advised to have a moderate level of language, literacy and numeracy to undertake this course. An assessment will determine support needs.
Please bring a pen and notebook.
Personal protective equipment is required:
Enclosed footwear, long cotton trousers and long sleeved cotton shirt are required to worn at all times when undertaking practical training.
Students failing to meet these minimum standards of dress will not be permitted entry to practical classes.
2 days theory online from home + 1 day face to face practicals.
Theory has to be completed before attending the practicals in class. Assessments along with resources will be provided once the enrolment is confirmed.
The PAT tested used for training are Seward and Metrel.
All students will be trained on the latest technology using a wide variety of Portable Appliance Testers.
|Code||Unit of Competency||Points (Hours)|
|UEENEEE101A||Apply Occupational Health and Safety regulations, codes and practices in the workplace||20|
|UEENEEP026A||Conduct in-service safety testing of electrical cord connected equipment and cord assemblies||20|
- Apply Occupational Health and Safety
- Conduct in-service safety testing of electrical cord
- Interpret the test results of any equipment they use
- Understand legislation, Australian Standard AS/NZS 3760 and Codes of Practice relevant to
‘Managing Electrical Risks in the Workplace’
- On successful completion of this course you receive a Statement of Attainment
⭐⭐⭐⭐⭐" Great knowledge from the trainer Kev. Highly recommend" CRAIG A.
⭐⭐⭐⭐⭐"Content was good, making use of video presentations and plenty of opportunity to practice. The flexible training hours really suited me, too. Thanks Kevin!" WILLEM W.
⭐⭐⭐⭐⭐"The course was very well set up to accommodate my roster. Kevin was brilliant, he guided me through all aspects of the course making sure I understood both the practical and theory. One of the best courses I have completed, very enjoyable." DAMIEN L.
*Total nominal hours is 40. 1 day full time, course completion duration may vary depending on student self-paced completion of the units and on job practical experience. Check with trainer for exact duration and click our Calendar for dates.