Certificate IV in Hazardous Areas Electrical DARWIN

UEE42611 - Certificate IV in Hazardous Areas Electrical - DARWIN*

Gap training for Electricians

* EEHA + Cert IV HA Gap Training

Gap Training Certificate IV Hazardous Areas only (if you only need those 4 units : UEENEEE038B, UEENEEE117A, UEENEEE124A, UEENEEK145A) :

Certificate IV in Hazardous Areas only : If you have completed Certificate IV in Instrumentation and EEHA and you are after a Certificate IV in Hazardous Areas, please pay the fee and provide your certificates and statements of attainment. Please note your EEHA certificate must have been completed in the past 2 years.


Certificate IV In Hazardous Area  - Installation and Maintenance of Electrical Equipment in Hazardous Areas  UEE42611 is a natural progression for Electricians wanting to upskill and work in the Oil and Gas Manufacturing Industry.

Certificate IV In Hazardous Area gives an understanding of Installation Testing and Commissioning of Electrical and Instrumentation Equipment such as :

  • Light fittings
  • Gas Monitors
  • Gas Detectors
  • Pressure
  • Level
  • Density
  • Flow and Temperature transmitters rated for Hazardous Environment

All Hazardous area Techniques will be taught and practiced for installation and testing of Exd, Extd, Exp, Exe, Exi, Exm, Exo, Exq and so on.

Our Certificate IV In Hazardous Area Training provides competencies to :

  • supervise selection, installation, commissioning maintenance and testing of explosion-protected equipment and systems for control and monitoring of plant and processes
  • work with explosion protection techniques with elections in how they apply to coal mining, gas and dust atmospheres.
  • select, install, set up, test, fault find, repair and maintain stand-alone renewable energy equipment and systems (ERAC requirements for an ‘Electrician’s licence’)

On completion of your Certificate IV In Hazardous Area course, you will receive a Nationally recognised qualification.

Future Pathways include UEE44011 Certificate IV in Electrical Instrumentation or UEE50211 Diploma of Electrical and Instrumentation.

There is no funding currently available for this course.

In order to enrol in Certificate IV in Hazardous Area - Electrical you will require :

  • Certificate III in Electro Technology
  • A valid Unrestricted  Australian Electrical License
  • A valid ID (eg. Drivers licence)
  • 1 year experience

You will need to bring :

  • A wired headset or headphones
  • A notepad
  • A pen

You will also need to have an email address, a laptop and a reliable internet connection in order to complete the online theory part of the course.

Enclosed footwear must be worn at all times when you are on the premises.

Ongoing. Book your course and come in at anytime during our open dates and hours to start your course. This is a self-paced course. Check our calendar for open dates and hours.

Theory : 50% of the course, can be completed online from home

Practical : 50% of the course, to be completed in the office for hands on experience with the equipment

The requirements for granting this qualification will be met when competency is demonstrated and achieved for:

  • All the Core competency standard units, defined in the Core Competency Standard Units table below and
  • A combination of Elective competency standard units to achieve a total weighting of 300 points in accordance with the Elective Competency Standard Units table below.
CodeUnit of CompetencyPoints (Hours)CT/TBD
All Core competency standard units to be achieved  
UEENEEE038BParticipate in development and follow a personal competency development plan20CT
UEENEEE101AApply Occupational Health and Safety regulations, codes and practices in the workplace20CT
UEENEEE102AFabricate, assemble and dismantle utilities industry components40CT
UEENEEE104ASolve problems in d.c. circuits80CT
UEENEEE105AFix and secure electrotechnology equipment20CT
UEENEEE107AUse drawings, diagrams, schedules, standards, codes and specifications40CT
UEENEEE117AImplement and monitor energy sector OHS policies and procedures20CT
UEENEEE124ACompile and produce an energy sector detailed report60CT
UEENEEE137ADocument and apply measures to control OHS risks associated with electrotechnology work20CT
UEENEEG006ASolve problems in single and three phase low voltage machines80CT
UEENEEG033ASolve problems in single and three phase low voltage electrical apparatus and circuits60CT
UEENEEG063AArrange circuits, control and protection for general electrical installations40CT
UEENEEG101ASolve problems in electromagnetic devices and related circuits60CT
UEENEEG102ASolve problems in low voltage a.c. circuits80CT
UEENEEG103AInstall low voltage wiring and accessories20CT
UEENEEG104AInstall appliances, switchgear and associated accessories for low voltage electrical installations20CT
UEENEEG105AVerify compliance and functionality of low voltage general electrical installations40CT
UEENEEG106ATerminate cables, cords and accessories for low voltage circuits40CT
UEENEEG107ASelect wiring systems and cables for low voltage general electrical installations60CT
UEENEEG108ATrouble-shoot and repair faults in low voltage electrical apparatus and circuits40CT
UEENEEG109ADevelop and connect electrical control circuits80CT
UEENEEK145AImplement and monitor energy sector environmental and sustainable policies and procedures20CT
UEENEEM080AReport on the integrity of explosion-protected equipment in a hazardous area20TBD
Total points in core980 
Group B – Qualification Elective UnitsYou may complete units to a maximum weighting of 80Weighting PointsCT/TBD
UEENEEM020AAttend to breakdowns in hazardous areas – gas atmospheres20TBD
UEENEEM021AAttend to breakdowns in hazardous areas – dust atmospheres20TBD
UEENEEM022AAttend to breakdowns in hazardous areas – pressurisation20TBD
UEENEEM024AInstall explosion-protected equipment and wiring systems – gas atmospheres60TBD
UEENEEM025AInstall explosion-protected equipment and wiring systems – dust atmospheres60TBD
UEENEEM026AInstall explosion-protected equipment and wiring systems – pressurisation60TBD
UEENEEM028AMaintain equipment in hazardous areas – gas atmospheres60TBD
UEENEEM029AMaintain equipment in hazardous areas – dust atmospheres60TBD
UEENEEM030AMaintain equipment in hazardous areas – pressurisation60TBD
Group C – Qualification Elective UnitsYou must complete units to a minimum weighting of 220Weighting PointsCT/TBD
You may select all your elective units from this Group
UEENEEM039AConduct testing of hazardous areas installations – gas atmospheres40TBD
UEENEEM040AConduct testing of hazardous areas installations – dust atmospheres40TBD
UEENEEM041AConduct testing of hazardous area installations – pressurisation40TBD
UEENEEM042AConduct visual inspection of hazardous areas installations40TBD
UEENEEM044AConduct detailed inspection of  hazardous areas installations – gas atmospheres40TBD
UEENEEM045AConduct detailed inspection of  hazardous areas installations – dust atmospheres40TBD
UEENEEM046AConduct detailed inspection of  hazardous areas installations – pressurisation40TBD
UEENEEM078AManage compliance of hazardous areas20TBD


Job roles associated with this qualification relate to instrumentation, manufacturing and process control. Possible job titles and roles relevant to this qualification include:


  • Instrument Fitter
  • instrument technician
  • Plant Instrument technician
  • E&I technician
  • I&E Technician
  • Instrument technician
  • Plant operator
  • Process Technician
  • Maintenance Technician

⭐⭐⭐⭐⭐" I have just recently completed my cert IV EEHA training with Kevin and Ausinet and found the entire experience was a positive one. The teaching methods and course flexibility meant i was able to obtain my certification without having to take any time off work and still get through the theory at my own pace. The pricing of the course was extremely good and i later found that the course is supported through the trade union jetco fund which was an added bonus. I will be using Ausinet in the future for additional training for sure." VINNY S.


⭐⭐⭐⭐⭐" A bit like the HA courses that have rapidly became common place in the gas industry today so to is the need & focus now to up skill within the instrumentation field. This is where Kevin excels and sits apart from other training providers, with his informative, patient and thorough knowledge that comes from his years of experience in the field and a course structure that comes from listening to what people want from their training provider, i am happy to recommend Ausinet and Kevin for both the training i have undertaken and working alongside him in the field, great effort" ALAN H.

* Total nominal hours is 1280. An average of 5 days full time intensive practical block, Options available for Flexible day and night classes depending on availability. Course completion duration may vary depending on students self-paced completion of the units. Check our Calendar for dates. This is a competency based training not an attendancy based training. Duration is subjective and varies with an individuals experience, intellect and tenacity. Fees must be paid in no more than $1500 instalments.

Call Now Button Scroll to Top