EEHA-REF - eEHA Refresher (Hazardous Areas) - DARWIN
ABOUT THE COURSE
EEHA Refresher (Hazardous Areas) is prepared for licenced Australian electricians who are required to attend a refresher program for electrical equipment in hazardous areas (EEHA)to refresh their skills and knowledge to match current industry standards on competencies that they have already gained.
The EEHA refresher training is intended to bring current Australian licenced electricians who have been previously trained in hazardous areas up to date on any changes to hazardous area standards and legislation.
The EEHA Refresher course covers gas, dust and pressurisation.
You will need to bring :
- A wired headset or headphones
- A notepad
- A pen
You will also need to have an email address, a laptop and a reliable internet connection in order to use our online LMS platform.
Enclosed footwear must be worn at all times when you are on the premises.
How often do I need to do my EEHA Hazardous Area Refresher course?
According to the Australian Standards " Appropriate continuing education or training shall be undertaken by personnel on a regular basis".
Most Oil and Gas employers will get their employees to do this refresher every 2 years. As per the standards this duration must not exceed 5 years. This could be formal training or on the job training.
Course starts Monday every 2 weeks. Call or email the office for dates.
2 days face to face practicals
Prior learning of some or all of the below units are essential:
|Competency Standard Units|
|UEENEEM080A||Report on the integrity of explosion-protected equipment in a hazardous area|
|UEENEEM020A||Attend to breakdowns in hazardous areas – gas atmospheres|
|UEENEEM021A||Attend to breakdowns in hazardous areas – dust atmospheres|
|UEENEEM022A||Attend to breakdowns in hazardous areas – pressurisation|
|UEENEEM024A||Install explosion-protected equipment and wiring systems – gas atmospheres|
|UEENEEM025A||Install explosion-protected equipment and wiring systems – dust atmospheres|
|UEENEEM026A||Install explosion-protected equipment and wiring systems -pressurisation|
|UEENEEM028A||Maintain equipment in hazardous areas – gas atmospheres|
|UEENEEM029A||Maintain equipment in hazardous areas – dust atmospheres|
|UEENEEM030A||Maintain equipment in hazardous areas – pressurisation|
|UEENEEM039A||Conduct testing of hazardous areas installations – gas atmospheres|
|UEENEEM040A||Conduct testing of hazardous areas installations – dust atmospheres|
|UEENEEM041A||Conduct testing of hazardous area installations – pressurisation|
|UEENEEM042A||Conduct visual inspection of hazardous areas installations|
|UEENEEM044A||Conduct detailed inspection of hazardous areas installations – gas atmospheres|
|UEENEEM045A||Conduct detailed inspection of hazardous areas installations – dust atmospheres|
|UEENEEM046A||Conduct detailed inspection of hazardous areas installations – pressurisation|
⭐⭐⭐⭐⭐" Just completed my HA refresher with Kev. Course was very well set out. Kev is very knowledgeable and helpful. Highly recommend using Ausinet when looking to upskill or maintain competencies" MITCH T.
⭐⭐⭐⭐⭐" The courses are set out very well and easy to follow. Definitely recommend Ausinet as the training provider for anyone looking to enrol." JOSEPH P.
⭐⭐⭐⭐⭐"I just completed a EEHA Refresher with Kev, the course was instructed very well. With very short notice I was able to complete this course with flexible class times." NEIL F.
* An average of 2 days full time intensive practical block, Options available for Flexible day and night classes depending on availability. Course completion duration may vary depending on students self-paced completion of the units. Check our Calendar for dates. This is a competency based training not an attendancy based training. Duration is subjective and varies with an individuals experience, intellect and tenacity.