UEENEEI150A - Basic PLC (Programmable Logic Controller) - DARWIN
ABOUT THE COURSE
This basic PLC training is ideal for electrician, electrical maintenance personnel and design engineers and those who want to familiarise themselves with programmable controller and automation technologies used in building, construction and industrial automation.
In this PLC Basic Course participants will learn about programmable logic controller (PLC) technology and industrial control devices used in automation.
The focus is on PLC hardware configuration and programming methods using basic logic functions. Functional requirements include operator control, status indication, alarms, and equipment maintenance policy.
In order to enrol in this course you will require :
- A valid Unrestricted Australian Electrical Licence
- A valid ID (eg. Drivers licence)
Electrical and Electronic engineers do not require Electrical Licence to enrol into this course however they must complete occupational health and safety module which is a prerequisite to this course and is provided at no extra cost.
1 day face to face practical exam, recommended training hours for an inexperienced electrician is 60 hours of self paced studying and online practicals
|Code||Unit of Competency||Points (Hours)|
|UEENEEI150A||Develop, enter and verify discrete control programs for programmable controllers||60|
⭐⭐⭐⭐⭐" Professional, patient and very knowledgeable. I highly recommend if you are after some upskilling." BEN C.
⭐⭐⭐⭐⭐" Currently in my final stages of completing my qualifications. I found the courses to be very informative Kevin is always on hand to guide me through any questions. The knowledge and hands on experience with the equipment in the lab that I have gained will definitely put me at a distinctive advantage in the workplace." CLAUDIO C.
*Total nominal hours is 60. 2 days face to face exam, course completion duration may vary depending on student self-paced completion of the units and on job practical experience. Check with trainer for exact duration and click our Calendar for dates.