Electrical Test and Tag Course BRISBANE

UEESS00174 - Electrical Safety Testing of Electrical Cord Connected Equipment and Cord Assemblies Skill Set - BRISBANE

Supersedes and is equivalent to UEESS00098 – Restricted – Electrical safety testing of electrical cord connected equipment and cord assemblies

Check our calendar below for available dates

Blended learning mode – Self Paced online theory + 1 Day Practicals

RECOMMENDED

Approx 2 days theory online +  1 day self paced practicals at our facilities. Start the course online on our E-learning platform at anytime and book a date that is available on the below calendar for your 1 day of practicals. This option is ideal for people who are self motivated and want flexibility around their work and life schedule. Click the Book Now button to enrol.

Special Group Discount – 20% OFF for 5 STUDENTS  or more. Discount applied automatically.

MTWTFSS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31

Our Test and Tag, Three Phase and Plug Top Courses are usually available every day of the week Monday to Friday. You do not need to contact us to reserve a date, if it is green on the calendar, that means it is available and you can book it!

Please note this calendar is not clickable : find an available date that suits you and mention it in your Booking notes on the checkout page.

Please allow enough time for the student to complete the theory assessments from home (approx 2 full days)

Test and Tag Calendar

Alternative option – 2 days One on One Face to Face training  – In class 

100% in class face to face with the trainer at set dates and times. The trainer will be one on one with you and take you through the whole content of the course. He will be your personal coach throughout your learning experience. This is a premium service for students who like a classroom setup and do not like online training. Contact us to organise training dates and payment. Duration : 2 Days – Price : $2,200

IMPORTANT INFORMATION

As per the Worksafe QLD regulations, completing this course will allow you to test and tag equipment at your workplace. If you plan to open your own Test and Tagging business in Queensland, you will need to get a Restricted Electrical Contractors Licence as well. 

TEST AND TAG + PLUG TOP REPLACEMENT COURSE

COURSE PACKAGE – 1-2 DAYS – $695

You could do your Test and Tag + Plug Top Replacement Courses in one day. In this case please allow 10 to 11 hours for finishing all 2 courses. If you would like to do at a slower pace add an extra day to ease the workload.

ABOUT THE COURSE

Test and Tag is used to check the safety of electrical appliances. This is a safety requirement and testing and tagging equipment should be conducted on a regular basis. 

This Test and Tag Training Course is the perfect short course that will give you the opportunity to work with the portable apparatus tester, utilising test results to establish the safety status, identifying safe and unsafe cords and apparatus, applying appropriate tagging, documenting testing activities and handling unplanned events.

This Test and Tag Training Course gives you real experience of testing & tagging. In this course you will get real experience in the workshop testing & tagging equipment which actually you are going to test more often.

The Test and Tag Training Course meets the requirements of both the Australian Standards and the WHS Regulations Code of Practice ‘Managing Electrical Risks in the Workplace’ which states inspection and testing of electrical equipment should only be carried out by a competent person who has the relevant knowledge, skills and test instruments to carry out the relevant inspection and testing. You will get a Nationally recognised Certificate on completion of your course.

Future pathways include the Test and Tag Three Phase course.

There is no funding currently available for this course.

  • Blended self paced mode : You will have to complete the theory component online from home on our E learning system before you come in for the date you have booked for your practicals. This part could take up to 2 full days. You will then come in for your practicals to be done at our facilities. This part of the course is also self-paced, You will be given resources, guidance, step by step instructional E-lectures and practical documentation to practice test and tag on real world appliances and most widely used PAT Testers. There will be an exam at the end of the course where the trainer will evaluate your skills and fill any skills gap to start Testing and tagging confidently from the moment you walk out the door. Our trainer is on site and will be available to answer any of your queries at anytime.
  • One on one Face to Face training :  The trainer will walk you through the whole content of the course and go through every theory question and practical activity with you one on one. He will be your personal coach for this course. 

You will need a Valid ID eg. Drivers Licence to enrol in this course

There are no other entry requirements to this qualification. It is advised to have a moderate level of language,literacy and numeracy to undertake this course. An assessment will determine support needs.

Please bring a pen and notebook.


Personal protective equipment is required:


Enclosed footwear, long cotton trousers and long sleeved cotton shirt are required to worn at all times when undertaking practical training.


Students failing to meet these minimum standards of dress will not be permitted entry to practical classes.

Upon successful completion of this course you will receive a Nationally Recognised Statement of Attainment. This will enable you to Test and Tag equipment within your company. 

 

Course Outcome:

  • Apply Occupational Health and Safety
  •  Conduct in-service safety testing of electrical cord
  •  Interpret the test results of any equipment they use
  • Understand legislation, Australian Standard AS/NZS 3760 and Codes of Practice relevant to
    ‘Managing Electrical Risks in the Workplace’

CodeUnit of CompetencyPoints (Hours)
UEECD0007Apply work health and safety regulations, codes and practices in the workplace20
UEERL0003Conduct in-service safety testing of electrical cord connected equipment and cord assemblies20

UEECD0007 supersedes and is equivalent to UEENEEE101A

UEERL0003 supersedes and is equivalent to UEENEEP026A

  • Appliance test and Tag Technician

⭐⭐⭐⭐⭐" Great knowledge from the trainer Kev. Highly recommend" CRAIG A.

 

⭐⭐⭐⭐⭐"Content was good, making use of video presentations and plenty of opportunity to practice. The flexible training hours really suited me, too. Thanks Kevin!" WILLEM W.

 

⭐⭐⭐⭐⭐"The course was very well set up to accommodate my roster. Kevin was brilliant, he guided me through all aspects of the course making sure I understood both the practical and theory. One of the best courses I have completed, very enjoyable." DAMIEN L.

*Duration is for practicals only. Theory is to be completed from home. Total nominal hours is 40. 1 day full time, course completion duration may vary depending on student self-paced completion of the units and on job practical experience. Check with trainer for exact duration and click our Calendar for dates.

METREL DELTA GT 3309  – $1,390

Buy your Metrel PAT Tester along with your course so you can use it for your practicals and get familiar with it!

We will give it to you when you get to class for your practicals*. You can use it and make sure you know how to use it for future testing!

*Please place your order at least one week before your practicals date

Metrel DELTA 3309 Kit – $4,230 $4,700

Buy your Metrel PAT Tester along with your course and get 10% OFF on the original price of the kit i.e $4700

Includes :

  • Metrel 3309 PAT Tester
  • Zebra ZQ520 bluetooth printer
  • Carry case
  • Android App and Tablet
  • Power Supply 100-240VAC to 12VDC 2A suit P4T/ZQ520
  • Print tags 250 of each (blue, yellow, green, orange, red, white)
Conductive Metallic Cloth – $60

Conductive Metallic Cloth for testing leakage on Class II Appliances, Size 500mm x 500mm.

seaward
SEAWARD PAC3760DL – $1199

Buy your PAT Tester from our partner TERRITORY INSTRUMENTS and get 10% Off the above price. Feel free to bring it for your practicals! (show proof of purchase for your Test and Tag course with Ausinet to get your discount)

FAQ

Test and Tag for personal appliances or at your workplace

In QLD if you want to do testing and tagging for your personal electrical equipment, you have to follow the following steps:

  • Successfully complete a Nationally Recognized Test and Tag course from any institute in QLD
  • Follow and work with AS/NZS 3012 or 3760 standards
  • Make sure you follow the WorkSafe Queensland guidelines and rules
  • Don’t hesitate to do a Test and Tag refresher course if you need to refresh your knowledge

Test and Tag as a service to clients other than the organisation you are employed at

If you are seeking to provide the test and tag services in Queensland as a service you will need to follow the below steps :

  • Apply for a Restricted Electrical Contractor licence with the QLD Electrical Safety Department
  • Successfully complete a Nationally Recognized Test and Tag course from any institute in QLD
  • Follow and work with AS/NZS 3012 or 3760 standards
  • Make sure you follow the WorkSafe Queensland guidelines and rules

Don’t hesitate to do a Test and Tag refresher course if you need to refresh your knowledge

*Duration is for practicals only. Theory is to be completed from home. Total nominal hours is 40. 1 day full time, course completion duration may vary depending on student self-paced completion of the units and on job practical experience. Check with trainer for exact duration and click our Calendar for dates.

Call Now Button Scroll to Top